Do-it-yourself pool repair: types of breakdowns and how to fix them
If the pool is installed on the site, outdoor recreation brings the greatest pleasure. During operation or due to errors made during installation, various malfunctions may occur Swimming pool repair some of them you can do yourself, saving a lot of money.
Contents of the article:
What can break in the pool
The most common breakdowns include
- Rapid water pollution.
- Drainage problems.
- Burnout of the backlight lamp (spotlight).
- Inadequate air conditioning.
If it is a hydraulic problem, it is recommended to involve a professional in the repair work. Troubleshooting such problems requires in-depth knowledge and equipment that ordinary amateurs do not have at their disposal.
Pool bowl repair
The bowl repair technique is simple and can be mastered by anyone. Start the process by inspecting the surface. It is worth conducting a thorough inspection so as not to miss minor deformations.
Before eliminating detected defects, it is necessary to identify the cause of the breakdown in order to avoid repeated damage.
Among the main provoking factors:
- Incorrectly installed waterproofing, poor-quality waterproofing film.
- Insufficient preparation of objects for wintering.
- Lack of insulation layer or insufficient insulation thickness.
- Errors in laying communications.
To prepare the pool for the warm season, the following amount of work must be completed.
- Remove minor damage to the finish and seal cracks with special putty.
- Treat with waterproofing material.
- Apply a layer of liquid glass to all surfaces of the bowl.
- Let the wall dry and then prime it with a primer or sealant.
- Lay tiles or mosaics.
Allow the concrete to cure for at least 28 days. During this entire time, the surface should be kept moist to prevent cracking. It is also worth protecting the walls of the bowl from direct sunlight.
If significant damage is found in the concrete bowl, it is recommended to re-fill the concrete. To do this, it is necessary to remove unstable elements from the entire surface, treat with soil, and then create formwork.
A concrete layer of at least 5 cm is required. In addition, waterproofing, liquid glass and finishing materials are required.
Parameters of the concrete used:
- Brand M350 – M400;.
To prepare one cube of concrete solution, 600 kg of cement, 150 kg of medium sand (debris removed), 1 ton of fiber 700-900 grams, 1 kg of plasticizer and water are required.
If the destruction affects the reinforcing layer of the bowl, a major repair is required. This will require the installation of new reinforcement, pouring concrete, installation of treatments (waterproofing materials and liquid glass) and decoration.
Don’t try to revive an aging structure that is leaking on all sides. It’s easier to demolish and build a new pool. Partial repairs are a waste of time, since collapsing bowls have dilapidated communications.
What to do if the water drainage is not working properly?
Slow removal of water leads to non-compliance with the rules for arranging the water supply system. This may be due to inappropriate slopes of the main lines when laying sewer collectors. When using low quality metal pipes, leaks and sulfates occur during the rutting process. Even when using plastic pipes, there is a reality of leaks if the connection is bypassed by technology.
If you plan to completely replace the pipeline, it is recommended to use polypropylene pipes. As an option, choose high-quality PVC-U, LESPIPE.
This product is not preferable to analogues with the following advantages.
- Easy installation using connecting elements of the same brand.
- Inertness to aggressive environments.
Inflatable pool repair
Inflatable pools are made of rubber or PVC. When choosing an adhesive for fixing holes, you need to consider the type of material. In some cases, on the pool packaging, the manufacturer gives recommendations on the choice of adhesive composition for repair work.
In specialized stores you can find kits with glue, adhesive and liquid patch. In any case, the adhesive composition must be waterproof. Otherwise, the holes will quickly be sealed. Another important advantage of the adhesive composition is the drying speed.
- Intex sets (designed specifically for air mattresses and swimming pools).
Sequence of repair work:
- Clean the surface with an alcohol solution.
- Use fine sandpaper on both sides of the glue.
- Apply glue to the surface, cover with adhesive tape and press with a heavy object for 1 hour.
If it is difficult to determine where the pool is damaged, it should be inflated and lowered into the water. Where bubbles form, there is damage.
